Apo has released this STW specifically for the pipe tests of J. O of Sotchi.
Obviously, for this kind of trials, it must be a very technical, responsive, precise and catchy on hard snow or ice board.
To meet these criteria, Apo has pulled out all the stops: Classic camber, reinforcements in carbon in tip and tail for having a maximum power in cornering as well as grip.
This twin-tip with traditional camber is directed to riders of advanced or expert level since it is the ultimate board in terms of performance. It is very powerful and accurate and provides a big pop, very appreciable in a pipe or on the big tables of parks. This type of boards, narrow enough in waist with a very tonic core and a traditional camber are also very effective in carving at high speed on hard snow.
If you are a technical, demanding and powerful rider you will get the best from the STW and there, it will give you extraordinary pleasure.
- Camber: Mastery and precision with boards with traditional camber designed to go everywhere with a maximum of mastery and dynamism, as well as more precision and power, to regain the original sensations of the snowboard.
- Slanted Sidewalls : The slanted sidewalls are in ABS and all with serigraph.
- Double Flex : Manoeuvrability and liveliness: the kernel is widened slightly between the feet, to win in manoeuvrability while maintaining all the energy of the board.
- Woodcore PP2 Dual core: Lightness and precision with the PP2 Dual core that has been designed for a considerable weight gain and very high performance. The mixture of poplar and Paulownia creates an ultra responsive and accurate board. Thus, it reaches the ultimate versatility.
- Carbon XV: Nerviness and power, an X and a V are placed on the tip and tail of the dashboard to optimize the pop of the board for more responsiveness and recovery in end of turn and in ollie.
- Freestyle Shape: 95% Twin Tip, the place of tip is slightly more progressive than that of the tail. The core and the inserts are centred, and the side line is shorter, for a better freestyle behaviour.
- Sintered 8000 bases: Formula 1, the ultimate in trench soles; it is simply the formula 1 of the slides on snow.
|Espátula (mm)||Patin (mm)||Talón (mm)||Peso (g)||Unit weight|
Inescapable model of the 2012 range, the CUDA V2 is a very powerful binding that combines a max of comfort and precision. The goal of its manufacturing criteria is to minimize the weight, maximize the power, the maintenance and the reaction time.
Thus it has a extruded hoop and a perforated asymmetric spoiler, new
more wrapping and more dynamic straps, with new faster and more manoeuvrable buckles and a bed-of-foot completely covered with EVA compresses for a comfort
with pen weight.
A good value for riders who demand the best in terms of maintenance, comfort and responsiveness to ride with pleasure all playgrounds offered by the mountain.
- Buckles - materials: GripLight
- Flange: HCX-33
- Spoiler : Contour Light with Heel Grip
A piece of rubber is embedded at the bottom of the EVA pad of the spoiler to prevent the heel of your boot from gliding, thus ensuring a perfect fit and an immediate reaction to each of your movements.
- Straps : 40oz
- Tilted gas pedal: The closest your boot is to the gas pedal, the more you gain in precision. We have tilted the gas pedals on some of our bindings, thereby increasing the surface area in contact with the haystack on the zone of toes and opening the way to a whole new sensation of contact with the board.
- Tilted foot bed 3°: A light tilt of 3° toward the front retains the natural alignment of the feet and legs, relieving the tension of a larger distance between the feet and increasing the pressure at the nose and tail for higher ollies and longer butters.
- Gel cushions: Bindings is never too padded. We have therefore replaced the EVA pads for gel pads under each of three areas of the foot support to maximize shock absorption, eliminate vibration and minimize fatigue.
- EVA indicators of hardness: all our MagneBeds and Triad Pads are formed of a medium pads, plus one at the front and one at the heel ; each pad is therefore designed to present a value of different hardness scale (Shore A) adapted to a specific function: • 50 A to 60 A: improves responsiveness with an average high for median / front pads • 40 A: increases shock absorption with a lower value for the heel pad. Choose the combination that best fits your style of slides and enjoy the perfect blend of comfort and performance.
- EHT Extruded Heelcup Tech (arch) : 50% more reactive, 20«» lighter. Micro-adjustments ensure your freedom of movement as well as an infinite number of options of size and centring.
- Colour: The bindings have two different colours.
|Peso (g)||Tamano EU||Tamano MP|