referencia : BD115082
The BLACK DIAMOND model is the most impressive one intended for the ones who are eager for virgin backcountry lines all around the world; the CARBON MEGAWATT is the ideal ski for touring in powdery snow. The new construction further reduces the carbon Megawatt (240 grams less per pair than the previous generation) while maintaining its power and evolution speed.
The touring skis of the FREE TOUR SERIES range are remarkably light and conceived to inject the alpine performance in backcountry. The models of the range eliminate the jumpiness and vibrations without reducing the effectiveness uphill.
> Width at waist of 120 mm to float in powder, with camber under the foot and tip and tail rocker.
> Formula One 3D Light Sandwich construction with pre-preg carbon and paulownia wood core.
> Thanks to its optimized construction, this is one of the lightest skis in the market in this size.
> Straight ABS sidewalls of 5 mm with Power Edges
- Notches for SkinLock skins
- Optimal usage: 90% soft snow / 10% hard snow
|Size||Espátula (mm)||Patin (mm)||Talón (mm)||Radio (m)||Peso (g)||Unit weight|
Plum Guide ultralight bindings machined from solid aircraft aluminium, steel and high-strength plastic.
solid machined wedge, 3 adjustable positions by rotation with the ski pole. Highly innovative heel rotation system: changing between wedge heights is a breeze. Whatever your wedge position, it is still very easy to insert the ski pole into one of the 4 holes to turn the heel, with either the right or left hand.
In the downhill position, the boot is 15mm above the ski, which ensures excellent transmission of forces and responsiveness.
Forward lever is very easy to operate, even with gloves and the tip of the pole.
Adjustable 30mm rear plate, providing a 4-5 size adjustment range.
Spacing of the screws is the same as for the Dynafit bindings.
Accommodation of Dynafit compatible blades, without removing your boots.
Side and front release, release values 5.5 to 12 DIN.
This binding complies with the ISO safety standard.
- "Low Tech" compatible
- Adjustable 30mm rear plate (4-5 sizes)
- Accommodation of Dynafit compatible blades
- DIN value: 5.5 to 12
- ISO standard
.- Weight: 365 grams (with screws and strap)
|Size||Peso (g)||Unit weight|