referencia : 8A511200
Want to see what the Bonafide hype is all about? Snap a couple of turns on the renowned ski to feel what has every ski tester raving.
This do-everything ski includes a 98mm waist, new Carbon Flipcore, a rocker-camber-rocker profile, and two sheets of metal.
TThe Bonafide is the most versatile ski in Blizzard’s Freeride lineup. You can spend almost everyday next winter on the Bonafide and you won’t regret it.
- Lenghts: 166-173-180-187 cm
- Sidecut: 133-98-118 mm
- Radius: 21.0 m (180 cm)
- Construction: Sandwich Compound Sidewall; Poplar-Beech Woodcore, Double Ti + Ti Binding Interface
The sidewall built into the ski construction provides the following advantages:
- Improved transmission of skier’s movements to edge
- Constant pressure along the entire length of the ski
- Greater stability of the entire structure
- Impeccable control
- Maximum carving performance
- Rocker Camber Rocker : Ski profile with a rocker at the tip and tail, camber in the middle. Reducing the pressure on the edge at the tip and tail makes the ski even easier to handle and increases floatation on powder snow. The camber guarantees great grip on packed snow in any case.
- Carbon Flipcore : Flipcore Technology revolutionized the perception of what a rockered ski could do. Carbon Flipcore is the evolution of this revolutionary process and sets a new standard for performance in Freeride skis.
By integrating bi-directional carbon fiber into the rockered areas of the tip and tail, we were able to further increase the stability and predictability of our Freeride skis. The rockered sections feel calm and are less prone to vibration. The carbon fiber material in the tip and tail also reduces the swing weight which makes the skis easier to maneuver. From deep pow and skied up crud - to firm groomers and chalky bumps, Carbon Flipcore gives you the feeling that you’re even more connected to the snow than ever before.
|Size||Espátula (mm)||Patin (mm)||Talón (mm)||Radio (m)||Peso (g)|
The DUKE EPF is an hyper versatile freeride binding since its system allows passing to walking mode if, for instance, you approach to draw a line in this beautiful stuffed snow corridor you have spotted.
It is not a ski touring model but it has similar features allowing you to practice the so-called free-rando. The DUKE EPF is based on a new Extended Power Frame (EPF) and is thus 28% wider. To put it simply, the schema of the screws is 10 mm wider than before for accentuated power transmission. In addition, this new system allows using the totally redeveloped toe and heelpieces with more compact and rigid design. Recommended for skis over 88 mm.
"Highly recommended for the skis of more than 100mm at waist for optimal power transmission, you will finally be able to use 100% of the capabilities of your wide ski", clarifies its manufacturer.
Always with the possibility of hiking with wedge (7° and 13°) or without wedge (0°) and adjusting all kinds of ski or hiking boots.
NOTE: For skis with minimum waist width of 89mm.
NOTE: Several stop skis widths are available, please, during your order communicate the waist width of your ski.
- DIN adjustment: 6 to 16
- Weight (pack): 2760g (S) / 2790g (L)
- Available sole lengths: S : 265 - 325mm / L : 305 - 365mm
- EPF Extended Power Frame: The power booster. The new power frame, exclusively designed for the new Duke EPF, delivers breath-taking performance and amazing power transfer in every condition. Recommended for skis over 88 mm.
- Heel lifter: The titanium climbing aid offers two positions with 7° and 13°, which can easily be accessed with the ski pole, even in an unstable standing position. Integrated elastomer paddings dampen the impact reducing the irritating traditional “clack” and allow hiking more comfortably.
- Backcountry Technology : The uphill hiking mode integrated in the Duke binding features easy adjustment from Ride to Hike. The climbing bar offers a 7° and 13° position. During the descent, the BCT lever is protected from unwanted releases. A 40 mm backward movement of the binding in BC mode results in better-balanced and easier kick turns.
- Magnesium parts: Magnesium is the lightest and most robust metal construction material making it perfect for our high-end products. This makes you well equipped for a faster run and the most radical lines!
- Triple Pivot Elite toe piece : The toe construction with DIN/ISO up to Z 18 allows for impressive retentions when freeriding. The spring in the toe is inserted horizontally and with a sole plate inclined by 5°, it provides the highest energy absorption so as to reduce the risk of early release. A large surface optimises the power transfer and allows high-energy use. The toe pieces with this technology deliver an unparalleled level of performance in relation to their weight.
- AFD: Movable Anti Friction Device guaranteeing a highly precise release almost entirely unhindered by dirt, snow and ice! Adjustment of the AFD to the area of application ensures perfect functionality - from racing, for children’s bindings or on ski tours.
- Inter Pivot heelpiece offering formidable holding power in freeride due to its DIN/ISO values of 6-16. The Inter Pivot Heel directs the power forces in the angle of elasticity improving the holding power and reducing pre-releases.
|Size||Peso (g)||Unit weight||V_T_longueur_semelle_min-max|
|S||2630||2630||265 - 325 mm|
|L||2800||2800||305 - 365 mm|
En 1945, Toni ARNSTEINER fabrica el primer esqui Blizzard en su taller de carpinteria en Mittersill, Austria, a su regreso de la Segunda Guerra Mundial.
La marca austriaca ha tomado una nueva salida, desde que se unio al grupo Tecnica.
El Grupo Tecnica se basa en Italia en Giavera del Montello y la filial francesa se traslado a Annecy. Sus actividades incluyen botas de esqui, zapatos de outdoor, los esquis, Moon Boots y el equipo para los deportes de invierno como el esqui y raquetas de nieve.
Desde que se mudo a una nueva fabrica ultra moderna que comparte con Nordica, la marca Blizzard es necesaria en todos los sectores, excepto en el freestyle.