The BRAHMA belongs to the Freeride All Mountain range. This ski was clearly designed to go big on all terrains. It is slightly narrower than the Bonafide with its 88 mm waist. It is more versatile but features the same construction for an equal level of performance.
It is resistant, very stable and maneuverable. It offers control in large curves and on powder snow.
It is fast and comfortable thanks to its very good shock absorption qualities. Its Flip Core construction gives it a natural rocker shape. In combination with its tip-and-tail rocker with traditional camber at the center of the ski, it provides exceptional flotation and maneuverability on deep snow.
It is the ultimate all mountain freeride ski for those who want only the best on powder snow and on groomed pistes.
- LIP CORE construction
- Tip & Tail Rocker: rocker at tip and tail level / traditional camber under feet
- Sidewall: better energy transmission / increased strength / increased rigidity in torsion
- Sandwich Compound Sidewall
- Poplar-Bamboo-Paulownia-Wood, Double Ti + Ti Binding Interface
|Espátula (mm)||Patin (mm)||Talón (mm)||Radio (m)||Peso (g)|
The DUKE EPF is an hyper versatile freeride binding since its system allows passing to walking mode if, for instance, you approach to draw a line in this beautiful stuffed snow corridor you have spotted.
It is not a ski touring model but it has similar features allowing you to practice the so-called free-rando. The DUKE EPF is based on a new Extended Power Frame (EPF) and is thus 28% wider. To put it simply, the schema of the screws is 10 mm wider than before for accentuated power transmission. In addition, this new system allows using the totally redeveloped toe and heelpieces with more compact and rigid design. Recommended for skis over 88 mm.
"Highly recommended for the skis of more than 100mm at waist for optimal power transmission, you will finally be able to use 100% of the capabilities of your wide ski", clarifies its manufacturer.
Always with the possibility of hiking with wedge (7° and 13°) or without wedge (0°) and adjusting all kinds of ski or hiking boots.
NOTE: For skis with minimum waist width of 89mm.
NOTE: Several stop skis widths are available, please, during your order communicate the waist width of your ski.
- DIN adjustment: 6 to 16
- Weight (pack): 2760g (S) / 2790g (L)
- Available sole lengths: S : 265 - 325mm / L : 305 - 365mm
- EPF Extended Power Frame: The power booster. The new power frame, exclusively designed for the new Duke EPF, delivers breath-taking performance and amazing power transfer in every condition. Recommended for skis over 88 mm.
- Heel lifter: The titanium climbing aid offers two positions with 7° and 13°, which can easily be accessed with the ski pole, even in an unstable standing position. Integrated elastomer paddings dampen the impact reducing the irritating traditional “clack” and allow hiking more comfortably.
- Backcountry Technology : The uphill hiking mode integrated in the Duke binding features easy adjustment from Ride to Hike. The climbing bar offers a 7° and 13° position. During the descent, the BCT lever is protected from unwanted releases. A 40 mm backward movement of the binding in BC mode results in better-balanced and easier kick turns.
- Magnesium parts: Magnesium is the lightest and most robust metal construction material making it perfect for our high-end products. This makes you well equipped for a faster run and the most radical lines!
- Triple Pivot Elite toe piece : The toe construction with DIN/ISO up to Z 18 allows for impressive retentions when freeriding. The spring in the toe is inserted horizontally and with a sole plate inclined by 5°, it provides the highest energy absorption so as to reduce the risk of early release. A large surface optimises the power transfer and allows high-energy use. The toe pieces with this technology deliver an unparalleled level of performance in relation to their weight.
- AFD: Movable Anti Friction Device guaranteeing a highly precise release almost entirely unhindered by dirt, snow and ice! Adjustment of the AFD to the area of application ensures perfect functionality - from racing, for children’s bindings or on ski tours.
- Inter Pivot heelpiece offering formidable holding power in freeride due to its DIN/ISO values of 6-16. The Inter Pivot Heel directs the power forces in the angle of elasticity improving the holding power and reducing pre-releases.
|Peso (g)||Peso unitario||Longitud minimal y maximal de la suela|
En 1945, Toni ARNSTEINER fabrica el primer esqui Blizzard en su taller de carpinteria en Mittersill, Austria, a su regreso de la Segunda Guerra Mundial.
La marca austriaca ha tomado una nueva salida, desde que se unio al grupo Tecnica.
El Grupo Tecnica se basa en Italia en Giavera del Montello y la filial francesa se traslado a Annecy. Sus actividades incluyen botas de esqui, zapatos de outdoor, los esquis, Moon Boots y el equipo para los deportes de invierno como el esqui y raquetas de nieve.
Desde que se mudo a una nueva fabrica ultra moderna que comparte con Nordica, la marca Blizzard es necesaria en todos los sectores, excepto en el freestyle.