You know those days in ski towns when all productivity comes to a screeching halt because a massive dump has locals lined up at the bottom of the mountains?
Ever had a helicopter drop you off on a knife-edged peak with steep, untracked lines beckoning below?
The Spur is made for those days! Blizzard’s professional athletes were asking for a ski made specifically for those days, so we delivered. Enter the Spur.
Stable at high speeds, surfy in turns, pivots through technical terrain, and smears down spines; 125mm underfoot and Carbon Flipcore have revolutionized powder slaying in the Spur.
- Lenghts: 189 cm
- Sidecut: 146-125-134 mm
- Radius: 28.5 m (189 cm)
- Construction: Sandwich Compound Sidewall; Poplar-Bamboo-ISO-Wood, Carbon + Ti Binding Interface
The sidewall built into the ski construction provides the following advantages:
- Improved transmission of skier’s movements to edge
- Constant pressure along the entire length of the ski
- Greater stability of the entire structure
- Impeccable control
- Maximum carving performance
- Rocker Camber Rocker : Ski profile with a rocker at the tip and tail, camber in the middle. Reducing the pressure on the edge at the tip and tail makes the ski even easier to handle and increases floatation on powder snow. The camber guarantees great grip on packed snow in any case.
- Carbon Flipcore : Flipcore Technology revolutionized the perception of what a rockered ski could do. Carbon Flipcore is the evolution of this revolutionary process and sets a new standard for performance in Freeride skis.
By integrating bi-directional carbon fiber into the rockered areas of the tip and tail, we were able to further increase the stability and predictability of our Freeride skis. The rockered sections feel calm and are less prone to vibration. The carbon fiber material in the tip and tail also reduces the swing weight which makes the skis easier to maneuver. From deep pow and skied up crud - to firm groomers and chalky bumps, Carbon Flipcore gives you the feeling that you’re even more connected to the snow than ever before.
- Lite Core : Technology specifically studied to meet the particular needs of modern Freeride and All Mountain skiers. Reduced weight thanks to the Bamboo and Isocore cores.
|Espátula (mm)||Patin (mm)||Talón (mm)||Radio (m)||Peso (g)|
The JESTER is the binding designed by MARKER to meet the expectations of the freestylers and freeriders who rush.
This binding is very compact mainly due to the spring of the toe piece placed in the transverse position allowing you to get a particularly short binding, ideal for all kinds of rotations. Always in the spirit of a "free" usage, this binding, recommended for skis with waist width higher than 76mm, is equipped with a tear-resistant screw and centralized balance weight.
Thanks to the JESTER performance, you will be safe to draw beautiful lines and send tricks in the park.
- DIN adjustment: 6 to 16
- Standing height without ski: 22mm
- Triple Pivot Elite toe piece : The toe construction with DIN/ISO up to Z 18 allows for impressive retentions when freeriding. The spring in the toe is inserted horizontally and with a sole plate inclined by 5°, it provides the highest energy absorption to reduce the risk of early release. A large surface optimises the power transfer and allows high energy use. The toe pieces with this technology deliver an unparalleled level of performance in relation to their weight.
- AFD Stainless Steel : All MARKER bindings are equipped with a moveable AFD (anti friction device) leading to a highly precise release almost entirely unhindered by dirt, snow and ice! Adjustment of the AFD to the area of application ensures perfect functionality - from racing, for children’s bindings or on ski tours.
- Inter-Pivot heelpiece: The stunning heel construction delivers superior holding power for free riding, featuring DIN/ISO6-16. The Inter Pivot Heel directs the power forces in the angle of elasticity improving the holding power and reducing pre-releases.
- Magnesium parts: Magnesium is the lightest and most robust metal construction material making it perfect for our high-end products. You depart well equipped for faster descents and the most radical lines!
- EPS X System
- Weight of the pair: 1990g (with brake in 90), 2000g (with brake in 110), 2006g (with brake in 136)
- All MARKER bindings are certified by the German certification body TUV.
|Peso (g)||Unit weight|
En 1945, Toni ARNSTEINER fabrica el primer esqui Blizzard en su taller de carpinteria en Mittersill, Austria, a su regreso de la Segunda Guerra Mundial.
La marca austriaca ha tomado una nueva salida, desde que se unio al grupo Tecnica.
El Grupo Tecnica se basa en Italia en Giavera del Montello y la filial francesa se traslado a Annecy. Sus actividades incluyen botas de esqui, zapatos de outdoor, los esquis, Moon Boots y el equipo para los deportes de invierno como el esqui y raquetas de nieve.
Desde que se mudo a una nueva fabrica ultra moderna que comparte con Nordica, la marca Blizzard es necesaria en todos los sectores, excepto en el freestyle.