referencia : 8A516200
referencia : ADDIAVIPEC90
Alpine touring skiers have been begging for a ski that is equal parts ultra-light and uber-stable. Unfortunately, those requests went over promised and under delivered — until now!
Blizzard's brand new Zero G 85 is the lightweight ski you want underfoot when you’re climbing uphill to access pristine backcountry terrain.
With Carbon Drive—Blizzard's state-of-the-art three-dimensional carbon fiber frame—and an ultra-lightweight paulownia woodcore construction, the Zero G 85 boasts torsional rigidity and natural tip-to-tail flex.
85mm underfoot make this ski a great option for long days of touring that require a light and nimble setup.
The Zero G 85 is made for long days bagging vert by foot, navigating narrow couloirs, GS turns in open bowls, and skinning back up for another lap.
- Lenghts: 157-164-171-178-185 cm
- Sidecut: 116-85-99,5 mm
- Radius: 19.0 m (171 cm)
- Weight: 1.015g +/- 50g (164 cm); 0,67g/cm2
- Construction: Sandwich Compound Sidewall; Carbon Drive Technology
The sidewall built into the ski construction provides the following advantages:
- Improved transmission of skier’s movements to edge
- Constant pressure along the entire length of the ski
- Greater stability of the entire structure
- Impeccable control
- Maximum carving performance
- Rocker Camber Rocker : Ski profile with a rocker at the tip and tail, camber in the middle. Reducing the pressure on the edge at the tip and tail makes the ski even easier to handle and increases floatation on powder snow. The camber guarantees great grip on packed snow in any case.
- Carbon Drive : This technology is the integration of a carbon structure with an ultra-lightweight construction. Its special 3D geometry guarantees optimal flexional and torsional rigidity. The result is a level of stability and control unprecedented in the world of ski mountaineering.
Carbon Drive is the market’s first uni-directional carbon frame construction. Carbon Drive is the lightest weight alpine ski construction in the market. The Carbon Frame, combined with the sidewall, increases the torsional rigidity of the tip and tail which results in increased stability and power transmission. Carbon Drive delivers a level of downhill performance that has never existed in a touring ski.
|Espátula (mm)||Patin (mm)||Talón (mm)||Radio (m)||Peso (g)||Unit weight|
Completely revolutionary, the DIAMIR VIPEC 12 is the first ski touring binding with inserts with defined triggering.
To be clearer, this "Low Tech" binding system allows a lateral security triggering combined with the automatic heel piece. A great novelty in the ski touring world!
Lightweight, it ensures maximum security. For understanding its system, its inserts are mounted on a lateral "rail". Thus, in a fall with torsion, this "rail" moves to facilitate wedging. And in case of fall at low speed, the insert switches on the outside so that nothing can interfere with the ejection of the shoe.
Featuring the Easy Switch concept which allows you to pass from downhill mode to walking mode easily with the help of your pole, it is easy to use.
To finish, it is endowed with a broad support point and high stability of the system, for a more direct transfer of forces more and therefore more effective.
- Lateral security triggering : Its automatic stop allows a side trip in 2 phases. In a first phase, the sliding block moves laterally with the pin toe piece unit. In a second phase, the pin toe piece unit tilts laterally, thus freeing up the shoe. After tripping, the toe piece can be turned back to its initial position with a simple gesture. Note that the shoe shall be released only if the dynamic stroke of 11mm and the restoring force set have been crossed.
- Security frontal triggering: Its automatic toe grounder allows frontal triggering assured by the lateral tilt of the heel pin unit housed in the heel chassis. They move on a dynamic race of 4 mm and, after exceeding the restoring force set acting on the retention wedges of the rear inserts of the shoe, the latter is released.
- Defined security triggering: The active longitudinal compensation is the key of the defined triggering. The contact pressure of the shoe must remain constant for the triggering mechanisms to provide a defined triggering in all situations. Thanks to the Pin Safety system, the active longitudinal compensation provides constant pressure through the coming and going of the heel piece on the guide plate even during an extreme ski bending.
- Système Easy Switch : This Easy Switch system allows quick and simple donning and doffing. This system also facilitates the passage of the binding from the downhill mode to walking mode. The VIPEC 12 binding is compatible with all ski touring boots equipped with inserts.
- 3 levels of tilt: The Comfort Lift system allows 3 levels of tilt, 0°, 9° and 13°. The tilt change is done quickly and easily with your pole.
- Stop ski 90mm
- DIN value: 5-12
- Unitary weight (without stop skis): 520 g (verified weight 480 g)
- Stop skis weight (unitary): 65 g (verified weight 65 g)
|TALLA||Peso (g)||Unit weight|
En 1945, Toni ARNSTEINER fabrica el primer esqui Blizzard en su taller de carpinteria en Mittersill, Austria, a su regreso de la Segunda Guerra Mundial.
La marca austriaca ha tomado una nueva salida, desde que se unio al grupo Tecnica.
El Grupo Tecnica se basa en Italia en Giavera del Montello y la filial francesa se traslado a Annecy. Sus actividades incluyen botas de esqui, zapatos de outdoor, los esquis, Moon Boots y el equipo para los deportes de invierno como el esqui y raquetas de nieve.
Desde que se mudo a una nueva fabrica ultra moderna que comparte con Nordica, la marca Blizzard es necesaria en todos los sectores, excepto en el freestyle.