referencia : DADK301
referencia : FCCW10-3-6
Made with the same characteristics of the CHAM skis, the CHAM HIGH MOUNTAIN range allows reaching new peaks due to its lightened weight, which opens the doors of ski touring. Intermediate model with its 97 mm in waist, the CHAM HIGH MOUNTAIN 97 has a 100% fibre lighter construction and light Paulownia wood core; it is light enough to be efficient uphill and thus accessing the virgin slopes to reveal its full potential.
Made for rushing downhill on deep snow, its Levitation Profile" combining a 5-point sidecuts, a long rocker in tip, a classic camber under the foot and a narrower "pin-tail" provide a mixture of manoeuvrability, flotation, power and stability in all snow conditions.
"This complete ski will fulfil the skier on any type of land and snow, from the fresh fallen powdery to the hard", says its manufacturer.
- Rocker All Snow : A fairly long, progressive tip-only rocker for improved terrain absorption and impeccable flotation in powder. Ski rotation is facilitated making fore/aft balance easier and reducing muscle fatigue off-piste. The flat tail means you don't lose the tail pressure required for high speed Freeride or off-piste jump landings.
- Sandwich construction with straight edges on the entire length of the ski for maximum accuracy and performance.
- Levitation Profile : this represents the latest generation of ski design. The combination of a 5 point sidecut, extra long tip rocker, traditional camber underfoot and narrower "pin-tail" produces the reliability and versatility that are essential in freeride.
- Lightcore : Ski benefiting from the expertise of Dynastar in terms of mountaineering ski for building lightweight skis without compromise on performance.
- Paulownia wood: The core in Paulownia wood allows reducing the weight of the skis by 25%. Dynastar combines this wood to the fibres developed by the race service, to ensure skiability and optimal level of performance.
- Skins: In collaboration with POMOCA, Dynastar produces skins cut at the shape of the ski that are both powerful, resistant and easy to use.
|Espátula (mm)||Patin (mm)||Talón (mm)||Radio (m)||Peso (g)||Peso unitario|
Belonging to the Free Touring range "à la carte", the XM 13 are bindings specially designed for skiers followers of freerando.
Compatible with the shoes and "WTR" (with walking sole), it provides equivalent skiability as classic bindings while being able to transform into a touring binding uphill.
This is thanks to its reduced height (26 mm), its expanded wheelbase and its very high stiffness.In addition, its ergonomics and simplicity make the simplest bindings and the safest to handle to switch between ascending and descending modes.
NOTE: the ski stop C100 and C130 are available separately.
- DIN value:5-13
- Width of brake: 115 mm (100 and 130 mm available separately)
- Length adjustment heel: 55 mm
- Height : 26 mm
|Peso (g)||Peso unitario|
Desde 1963: Establecido desde 1963 en el valle de Chamonix, cerca de Mont Blanc, Dynastar reune a hombres y mujeres que comparten, a traves de valores comunes y la cultura comun, una pasion por el esqui y el rendimiento. Dynastar pone, desde hace 48 anos, sus conocimientos y experiencia al servicio de los esquiadores apasionados implicados y que les proporcione tanto el equipo tecnico y de diseno, de alta calidad.
Dynastar innova constantemente para ofrecer los amantes del esqui lo mejor en terminos de esquiabilidad. Con la aparicion del Rocker, todos los esquis de la gama estan equipados con esta nueva tecnologia que se adapta a cualquier nivel de la practica, la pista, fuera pista, con cada uno de los beneficios especificos.