From a range consisting of 3 graphics celebrating different periods of the career of the skier Doug COOMBS the COOMBACK reflect very well the versatility of the skier.
Its 102mm at waist, its all-terrain rocker and its lightness allow it to offer good buoyancy and great convenience to be able to ski on any slope you want to access.
- Construction : Fibre Triaxiale, Cap, Sapin/Poplar / Maple
- All terrain Rocker : This Rocker has been developed to be used in all snow conditions. The raised tip improves performance on variable and soft snow and facilitates the release curve, while the camber underfoot provides power, energy and edge grip on hard snow needed.
- Powder Tip All new skis of the freeride range have a tapered tip and the lowest profile in order to optimize the foreseeable nature of the tip in soft snow. The tips designed in such a way have their widest point declined to reduce the weight of the tip and the resistance in soft and changeable snow
- Progressive sidecut: Larger ski front, thinner tail and a progressive radius is a combination of two different radii whose purpose is to increase the versatility of the wider skis under the foot. In general, the skis have rather a single radius. This works very well on skis rather thin, but can make driving wider skis underfoot more difficult, especially in transformed snow. The use of progressive radius on wider skis improves the triggering of the turns and the performance on hard snow.
- Snowphobic Topsheet : Topsheets snow unloaders, specific of the Back models. Accumulated snow on a skiing can increase during a climb. Our SnowPhobic top system prevents the snow from accumulating on your skis and weighing you down. In fact, we have developed the tops specifically if the Back models using the same hydrophobic material on the soles but with lower thickness. You can even add wax on the topsheet to increase this effect of load shedding.
- Skin Grommets : All the Adventure skis are provided with a hole at both ends. The holes are covered, and can be opened simply with a flat-head screw, for use in ski touring. They are primarily designed for the installation of skins, but can also be used in the manufacture of a rescue sledge in backcountry, and also for marking support points in the snow.
- Carbon web: The structure MOD is wrapped with a carbon fibre, carbon strands are arranged at specific angles for added torsional rigidity of the secondary core. This allows retaining a light ski while providing the torsional stiffness to the places where it is needed.
|Espátula (mm)||Patin (mm)||Talón (mm)||Radio (m)||Peso (g)|
A lighter weight cousin of the Duke model, the BARON EPF is mainly aimed at lightweight freeriders (less than 120kg though). The new EPF technology greater power transmission on fat skis (over 98 mm). Although it is oriented toward descent, the BARON EPF has all the attributes of a touring binding: 2 position climbing bar, adjustable toe piece depending on the type of boot (touring or alpine), and option to add crampons.
- DIN 4 to 13
- EPF - Extended Power frame : The power booster. The new power frame, exclusively designed for the new Duke EPF, delivers breath-taking performance and amazing power transfer in every condition. Recommended for skis over 88 mm.
- Climbing bar : The titanium climbing aid offers two positions with 7° and 13° which can easily be accessed with the ski pole, even in an unstable standing position. Integrated elastomer paddings dampen the impact reducing the irritating traditional “clack” and allow more comfortable hiking.
- Triple Pivot Elite Toe : The toe construction with DIN/ISO up to Z 18 allows for impressive retentions when freeriding. The spring in the toe is inserted horizontally and with a sole plate inclined by 5° it provides the highest energy absorption so as to reduce the risk of early release. A large surface optimises the power transfer and allows high energy use. The toe pieces with this technology deliver an unparalleled level of performance in relation to their weight.
- AFD Stainless Steel : All MARKER bindings are equipped with a moveable AFD (anti friction device) leading to a highly precise release almost entirely unhindered by dirt, snow and ice! Adjustment of the AFD to the area of application ensures perfect functionality - from racing,for children’s bindings or on ski tours.
- Inter-Pivot Heel Piece : The stunning heel construction delivers superior holding power for free riding, featuring DIN/ISO6-16. The Inter Pivot Heel directs the power forces in the angle of elasticity improving the holding power and reducing pre-releases.
- Backcountry Technology : The uphill hiking mode integrated in the Duke binding features easy adjustment from Ride to Hike. The climbing bar offers a 7° and 13° position. During the descent the BCT lever is protected from unwanted releases. A 40 mm backward movement of the binding in BC mode results in a better balanced and easier kick turns
|Peso (g)||Unit weight||V_T_longueur_semelle_min-max|
K2 fue fundada en 1961 por los hermanos Bill y Don Kirschner en Vashon Island, cerca de Seattle, en los Estados Unidos.
K2 es conocido por su tecnologia de esqui de vanguardia en fibras de vidrio lo que hizo esquis mucho mas ligeros y mas reactivos que sus contemporaneos en metal y madera. Fabricante N ? 1 en los Estados Unidos, la marca atipica americana es conocida por sus productos innovadores que ofrecen gamas de esquis anchos y new school con espatulas mas o menos rocker.
El grupo K2Sport incluye a K2Skis, K2Snowboard, Line, Full-Tilt, Ride, Morrow o Madshus. K2Sport forma parte del grande grupo Jarden que incluye marcas como Volkl, Marker, sino tambien en areas muy diferentes con camping Gaz, Spontex o Mapa.