referencia : 1040304.101.1
referencia : 7616O1
The SHREDITOR 120 is a killer on powder and choppy snow. It is the most versatile ski of K2's freeride range. Its Power Rocker provides perfect flotation and gliding sensation close to that of surfing. Its Triaxial Braid construction mode gives it great power and snap. Its Directional Taper was specifically designed for better turning.
- Powder Rocker: Designed to have the best possible performance on deep powdery snow. This spatula is the highest and longest in the Rocker range and gives the skiers sensations close to the surf and an increased ease in powdery snow. There is always a curved area to maintain a sufficient edge grip on hard snow.
- Triaxial Braid construction: This patented process consists o surrounding the nucleus of woven glass fibre to increase the torsional stiffness and increase control. The skis with triaxial fibre have considerable power and nervousness while being easy to use, whether it be by experts or entry level skiers.
- Twintech Sidewall: This specific construction for Twin Tip skis improves the life of sides. A traditional side creates an angle of 90 degrees to the junction with the topsheet. Twin Tech construction actually gets the topsheet in the side, reducing the angle of grip on this sensitive area.
- Poplar/Paulownia core
- Directional Taper: A slightly wider tip than the tail optimizes the directional performance and enhances the ski performance in slides towards the front. This means that the ski prints a different curve when it slides in switch.
- Progressive sidecuts: Larger ski front, thinner tail and a progressive radius is a combination of two different radii whose purpose is to increase the versatility of the wider skis under the foot.
- Powder Tip
- ZCLIP Skin Compatible
- Skin Grommets: All the Adventure skis are provided with a hole at both ends. The holes are covered, and can be opened simply with a flat-head screw, for use in ski touring.
- Kick Tail.
|Espátula (mm)||Patin (mm)||Talón (mm)||Radio (m)||Peso (g)|
The DUKE EPF is an hyper versatile freeride binding since its system allows passing to walking mode if, for instance, you approach to draw a line in this beautiful stuffed snow corridor you have spotted.
It is not a ski touring model but it has similar features allowing you to practice the so-called free-rando. The DUKE EPF is based on a new Extended Power Frame (EPF) and is thus 28% wider. To put it simply, the schema of the screws is 10 mm wider than before for accentuated power transmission. In addition, this new system allows using the totally redeveloped toe and heelpieces with more compact and rigid design. Recommended for skis over 88 mm.
"Highly recommended for the skis of more than 100mm at waist for optimal power transmission, you will finally be able to use 100% of the capabilities of your wide ski", clarifies its manufacturer.
Always with the possibility of hiking with wedge (7° and 13°) or without wedge (0°) and adjusting all kinds of ski or hiking boots.
NOTE: For skis with minimum waist width of 89mm.
NOTE: Several stop skis widths are available, please, during your order communicate the waist width of your ski.
- DIN adjustment: 6 to 16
- Weight (pack): 2760g (S) / 2790g (L)
- Available sole lengths: S : 265 - 325mm / L : 305 - 365mm
- EPF Extended Power Frame: The power booster. The new power frame, exclusively designed for the new Duke EPF, delivers breath-taking performance and amazing power transfer in every condition. Recommended for skis over 88 mm.
- Heel lifter: The titanium climbing aid offers two positions with 7° and 13°, which can easily be accessed with the ski pole, even in an unstable standing position. Integrated elastomer paddings dampen the impact reducing the irritating traditional “clack” and allow hiking more comfortably.
- Backcountry Technology : The uphill hiking mode integrated in the Duke binding features easy adjustment from Ride to Hike. The climbing bar offers a 7° and 13° position. During the descent, the BCT lever is protected from unwanted releases. A 40 mm backward movement of the binding in BC mode results in better-balanced and easier kick turns.
- Magnesium parts: Magnesium is the lightest and most robust metal construction material making it perfect for our high-end products. This makes you well equipped for a faster run and the most radical lines!
- Triple Pivot Elite toe piece : The toe construction with DIN/ISO up to Z 18 allows for impressive retentions when freeriding. The spring in the toe is inserted horizontally and with a sole plate inclined by 5°, it provides the highest energy absorption so as to reduce the risk of early release. A large surface optimises the power transfer and allows high-energy use. The toe pieces with this technology deliver an unparalleled level of performance in relation to their weight.
- AFD: Movable Anti Friction Device guaranteeing a highly precise release almost entirely unhindered by dirt, snow and ice! Adjustment of the AFD to the area of application ensures perfect functionality - from racing, for children’s bindings or on ski tours.
- Inter Pivot heelpiece offering formidable holding power in freeride due to its DIN/ISO values of 6-16. The Inter Pivot Heel directs the power forces in the angle of elasticity improving the holding power and reducing pre-releases.
|Peso (g)||Unit weight||V_T_longueur_semelle_min-max|
K2 fue fundada en 1961 por los hermanos Bill y Don Kirschner en Vashon Island, cerca de Seattle, en los Estados Unidos.
K2 es conocido por su tecnologia de esqui de vanguardia en fibras de vidrio lo que hizo esquis mucho mas ligeros y mas reactivos que sus contemporaneos en metal y madera. Fabricante N ? 1 en los Estados Unidos, la marca atipica americana es conocida por sus productos innovadores que ofrecen gamas de esquis anchos y new school con espatulas mas o menos rocker.
El grupo K2Sport incluye a K2Skis, K2Snowboard, Line, Full-Tilt, Ride, Morrow o Madshus. K2Sport forma parte del grande grupo Jarden que incluye marcas como Volkl, Marker, sino tambien en areas muy diferentes con camping Gaz, Spontex o Mapa.